ZiiPOS Go! – Supported Hardware


This guide provides a list of common equipment or specifications which is required and/or supported across the Zii software family.

ZiiPOS Go! does NOT support any BYO equipment which is not listed within this document.


ZiiPOS Go!

Supported Master Terminals

ZiiPOS Go! is embedded software, and is supplied on only the following terminals:

  • ZiiPOS HK526 (Dual Screen + Printer)
  • Samsung Tab A8 10.5″ (8.0″ not supported)

Supported Auxiliary Equipment

ZiiPOS Go! has a limitation on auxiliary equipment supported:
2 x Additional printers
2 x Additional terminals
1 x Scale (serial only)

Printers – Full Support

Both English and Chinese language sets supported from factory, other languages will depend on the language set loaded to each individual printer.

  • Sewoo SLK-TS400 series (Ethernet, USB)
  • HPRT TP809 / POS80E
  • Bixlon DX220
  • HPRT D35 Label Printer (USB Only)

Printers – Partial Support

Devices known to work in some environments. English language supported only.

  • Epson TM-T20 series (Ethernet, USB)
  • Epson TM-T82 series (Ethernet, USB)
  • Epson TM-T88 series (Ethernet, USB)
  • Epson TM-M30 series (Ethernet, USB)


  • CAS PD-II (RS-232 only)

Extra Terminals

These terminals can run any of the Zii Software suite, such as Kiosk, KDS, POS or Table Ordering.

  • Apple iPad (6th generation or later), iOS 15 or higher
  • Apple iPad Air (3rd generation or later), iOS 15 or higher
  • Apple iPad Mini (5th generation or later), iOS 15 or higher
  • Apple iPad Pro (2nd generation or later), iOS 15 or higher
  • Samsung Tab S4 (or later), Android 10 or higher
  • ZiiPOS HK526 (Dual Screen + Printer)
  • ZiiPOS Smart POS Android Terminal (Both Dual Screen and Single Screen)


The below scanners have been tested and are known to work with ZiiPOS Go!
Some additional scanners may work but have not been tested. USB Supported Only.

  • Senor S-BT2D
  • Senor S-HF2D
  • Inateck BCST-70
  • HPRT 8600 2D Omni

Updated on 23 November 2022

Related Articles